mirror of
https://github.com/No-Chicken/Power-Pico.git
synced 2026-04-03 13:02:36 +08:00
329 lines
8.9 KiB
C
329 lines
8.9 KiB
C
/* USER CODE BEGIN Header */
|
||
/**
|
||
******************************************************************************
|
||
* @file : main.c
|
||
* @brief : Main program body
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2024 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
*/
|
||
/* USER CODE END Header */
|
||
/* Includes ------------------------------------------------------------------*/
|
||
#include "main.h"
|
||
#include "i2c.h"
|
||
#include "spi.h"
|
||
#include "tim.h"
|
||
#include "usart.h"
|
||
#include "gpio.h"
|
||
|
||
/* Private includes ----------------------------------------------------------*/
|
||
/* USER CODE BEGIN Includes */
|
||
#include <string.h>
|
||
#include <stdio.h>
|
||
#include "menu.h"
|
||
#include "common.h"
|
||
#include "delay.h"
|
||
#include "lcd.h"
|
||
#include "lcd_init.h"
|
||
#include "key.h"
|
||
#include "BL24C02.h"
|
||
/* USER CODE END Includes */
|
||
|
||
/* Private typedef -----------------------------------------------------------*/
|
||
/* USER CODE BEGIN PTD */
|
||
|
||
/* USER CODE END PTD */
|
||
|
||
/* Private define ------------------------------------------------------------*/
|
||
/* USER CODE BEGIN PD */
|
||
|
||
/* USER CODE END PD */
|
||
|
||
/* Private macro -------------------------------------------------------------*/
|
||
/* USER CODE BEGIN PM */
|
||
|
||
/* USER CODE END PM */
|
||
|
||
/* Private variables ---------------------------------------------------------*/
|
||
|
||
/* USER CODE BEGIN PV */
|
||
|
||
extern pFunction Jump_To_Application;
|
||
extern uint32_t JumpAddress;
|
||
|
||
/* USER CODE END PV */
|
||
|
||
/* Private function prototypes -----------------------------------------------*/
|
||
void SystemClock_Config(void);
|
||
/* USER CODE BEGIN PFP */
|
||
|
||
/* USER CODE END PFP */
|
||
|
||
/* Private user code ---------------------------------------------------------*/
|
||
/* USER CODE BEGIN 0 */
|
||
void Bootloader_Main(void)
|
||
{
|
||
// Bootloader 循环等待上位机指令
|
||
while (1)
|
||
{
|
||
// 1. 发送握手信号
|
||
uint8_t status = 0xAA;
|
||
SerialPutChar(status);
|
||
Serial_PutString("##PICO_BOOT##\r\n");
|
||
// 2. 在延时期间(比如500ms)不断检查有没有收到数据
|
||
// 这样既实现了延时，又不会阻塞接收
|
||
uint8_t key = 0;
|
||
for (int i = 0; i < 50; i++)
|
||
{
|
||
// SerialKeyPressed 应该是一个非阻塞检查函数
|
||
// 如果收到数据返回 1，否则返回 0
|
||
if (SerialKeyPressed(&key))
|
||
{
|
||
if (key == '0')
|
||
{
|
||
// 收到 '0'，进入菜单
|
||
Main_Menu();
|
||
}
|
||
}
|
||
HAL_Delay(10); // 每次只延时 10ms，检查 50 次 = 500ms
|
||
}
|
||
}
|
||
}
|
||
/* USER CODE END 0 */
|
||
|
||
/**
|
||
* @brief The application entry point.
|
||
* @retval int
|
||
*/
|
||
int main(void)
|
||
{
|
||
|
||
/* USER CODE BEGIN 1 */
|
||
SCB->VTOR = FLASH_BASE;
|
||
/* USER CODE END 1 */
|
||
|
||
/* MCU Configuration--------------------------------------------------------*/
|
||
|
||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||
HAL_Init();
|
||
|
||
/* USER CODE BEGIN Init */
|
||
|
||
/* USER CODE END Init */
|
||
|
||
/* Configure the system clock */
|
||
SystemClock_Config();
|
||
|
||
/* USER CODE BEGIN SysInit */
|
||
|
||
/* USER CODE END SysInit */
|
||
|
||
/* Initialize all configured peripherals */
|
||
MX_GPIO_Init();
|
||
MX_SPI2_Init();
|
||
MX_TIM1_Init();
|
||
MX_USART6_UART_Init();
|
||
MX_I2C1_Init();
|
||
/* USER CODE BEGIN 2 */
|
||
|
||
//sys delay
|
||
delay_init();
|
||
|
||
//key_boot
|
||
Key_Port_Init();
|
||
|
||
// PWM Start for LCD backlight
|
||
HAL_TIM_PWM_Start(&htim1, TIM_CHANNEL_3);
|
||
|
||
//lcd
|
||
LCD_Init();
|
||
LCD_Fill(0, 0, LCD_W, LCD_H, BLACK);
|
||
delay_ms(10);
|
||
LCD_Set_Light(50);
|
||
|
||
// extern eeprom BL24C02
|
||
uint8_t update_flag = 0;
|
||
if(!EEPROM_Init_Check()) {
|
||
update_flag = EEPROM_UpdateCommand_Check();
|
||
if(EEPROM_UpdateCommand_Check()) {
|
||
Serial_PutString("enter firmware update mode\r\n");
|
||
EEPROM_UpdateCommand_Write(false);
|
||
}
|
||
}
|
||
|
||
// 开机启动时如果按下KEY, 或EEPROM有升级标志, 进入boot中IAP升级模式
|
||
if(HAL_GPIO_ReadPin(KEYB_PORT, KEYB_PIN) == 0 || update_flag)
|
||
{
|
||
// 延时判断是否真的按下
|
||
delay_ms(500);
|
||
if(HAL_GPIO_ReadPin(KEYB_PORT, KEYB_PIN) == 0 || update_flag)
|
||
{
|
||
LCD_ShowString(72, LCD_H/3, (uint8_t*)"Bootload", WHITE, BLACK, 24, 0);//12*6,16*8,24*12,32*16
|
||
FLASH_If_Init();
|
||
Bootloader_Main();
|
||
}
|
||
}
|
||
|
||
// 如果没按下KEY1, 且有APP程序, 则运行APP, 没有APP则
|
||
else
|
||
{
|
||
uint32_t data1, data2;
|
||
char *str_flag;
|
||
uint32_t address = 0x08008000; // Flash 中数据的起始地址
|
||
|
||
// 读取地址为 0x08008000 的数据
|
||
data1 = *(uint32_t *)address;
|
||
|
||
// 读取地址为 0x08008004 的数据
|
||
data2 = *(uint32_t *)(address + sizeof(uint32_t));
|
||
|
||
// 将数据转换为字符数组
|
||
char str1[5], str2[5];
|
||
memcpy(str1, &data1, sizeof(data1));
|
||
memcpy(str2, &data2, sizeof(data2));
|
||
str1[4] = '\0';
|
||
str2[4] = '\0';
|
||
|
||
// 拼接两个字符数组
|
||
char combined_str[9];
|
||
strcpy(combined_str, str1);
|
||
strcat(combined_str, str2);
|
||
|
||
// 检查是否与 "APP FLAG" 相同
|
||
if (strcmp(combined_str, "APP FLAG") == 0)
|
||
{
|
||
// 如果相同则跳转
|
||
Serial_PutString("APP FLAG OK, jump to app\r\n");
|
||
//user code here
|
||
SysTick->CTRL = 0X00;//禁止SysTick
|
||
SysTick->LOAD = 0;
|
||
SysTick->VAL = 0;
|
||
__disable_irq();
|
||
|
||
//set JumpAddress
|
||
JumpAddress = *(__IO uint32_t*) (APPLICATION_ADDRESS + 4);
|
||
/* Jump to user application */
|
||
Jump_To_Application = (pFunction) JumpAddress;
|
||
/* Initialize user application's Stack Pointer */
|
||
__set_MSP(*(__IO uint32_t*) APPLICATION_ADDRESS);
|
||
Jump_To_Application();
|
||
}
|
||
// no legal APP
|
||
else
|
||
{
|
||
LCD_ShowString(74, LCD_H/3, (uint8_t*)"No App!", WHITE, BLACK, 24, 0);//12*6,16*8,24*12,32*16
|
||
LCD_ShowString(24, LCD_H/3+48, (uint8_t*)"Plz Download APP", WHITE, BLACK, 24, 0);
|
||
HAL_Delay(2000);
|
||
LCD_ShowString(72, LCD_H/3, (uint8_t*)"Bootload", WHITE, BLACK, 24, 0);//12*6,16*8,24*12,32*16
|
||
FLASH_If_Init();
|
||
Bootloader_Main();
|
||
}
|
||
}
|
||
|
||
|
||
/* USER CODE END 2 */
|
||
|
||
/* Infinite loop */
|
||
/* USER CODE BEGIN WHILE */
|
||
while (1)
|
||
{
|
||
/* USER CODE END WHILE */
|
||
|
||
/* USER CODE BEGIN 3 */
|
||
Serial_PutString("run in boot while(1)\r\n");
|
||
Serial_PutString("there is no legal APP\r\n");
|
||
HAL_Delay(500);
|
||
}
|
||
/* USER CODE END 3 */
|
||
}
|
||
|
||
/**
|
||
* @brief System Clock Configuration
|
||
* @retval None
|
||
*/
|
||
void SystemClock_Config(void)
|
||
{
|
||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||
|
||
/** Configure the main internal regulator output voltage
|
||
*/
|
||
__HAL_RCC_PWR_CLK_ENABLE();
|
||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||
|
||
/** Initializes the RCC Oscillators according to the specified parameters
|
||
* in the RCC_OscInitTypeDef structure.
|
||
*/
|
||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||
RCC_OscInitStruct.PLL.PLLN = 100;
|
||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||
RCC_OscInitStruct.PLL.PLLQ = 4;
|
||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
|
||
/** Initializes the CPU, AHB and APB buses clocks
|
||
*/
|
||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||
|
||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
}
|
||
|
||
/* USER CODE BEGIN 4 */
|
||
|
||
/* USER CODE END 4 */
|
||
|
||
/**
|
||
* @brief This function is executed in case of error occurrence.
|
||
* @retval None
|
||
*/
|
||
void Error_Handler(void)
|
||
{
|
||
/* USER CODE BEGIN Error_Handler_Debug */
|
||
/* User can add his own implementation to report the HAL error return state */
|
||
__disable_irq();
|
||
while (1)
|
||
{
|
||
}
|
||
/* USER CODE END Error_Handler_Debug */
|
||
}
|
||
|
||
#ifdef USE_FULL_ASSERT
|
||
/**
|
||
* @brief Reports the name of the source file and the source line number
|
||
* where the assert_param error has occurred.
|
||
* @param file: pointer to the source file name
|
||
* @param line: assert_param error line source number
|
||
* @retval None
|
||
*/
|
||
void assert_failed(uint8_t *file, uint32_t line)
|
||
{
|
||
/* USER CODE BEGIN 6 */
|
||
/* User can add his own implementation to report the file name and line number,
|
||
ex: Serial_PutString("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||
/* USER CODE END 6 */
|
||
}
|
||
#endif /* USE_FULL_ASSERT */
|