加入GPIO下拉和初始状态

software/bootloader/IAP_F411.ioc

@@ -19,21 +19,23 @@ Mcu.IP8=USB_OTG_FS
 Mcu.IPNb=9
 Mcu.Name=STM32F411C(C-E)Ux
 Mcu.Package=UFQFPN48
-Mcu.Pin0=PH0 - OSC_IN
-Mcu.Pin1=PH1 - OSC_OUT
-Mcu.Pin10=PB7
-Mcu.Pin11=VP_CRC_VS_CRC
-Mcu.Pin12=VP_SYS_VS_Systick
-Mcu.Pin13=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
-Mcu.Pin2=PB13
-Mcu.Pin3=PB15
-Mcu.Pin4=PA10
-Mcu.Pin5=PA11
-Mcu.Pin6=PA12
-Mcu.Pin7=PA13
-Mcu.Pin8=PA14
-Mcu.Pin9=PB6
-Mcu.PinsNb=14
+Mcu.Pin0=PC13-ANTI_TAMP
+Mcu.Pin1=PH0 - OSC_IN
+Mcu.Pin10=PA14
+Mcu.Pin11=PB6
+Mcu.Pin12=PB7
+Mcu.Pin13=VP_CRC_VS_CRC
+Mcu.Pin14=VP_SYS_VS_Systick
+Mcu.Pin15=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
+Mcu.Pin2=PH1 - OSC_OUT
+Mcu.Pin3=PB10
+Mcu.Pin4=PB13
+Mcu.Pin5=PB15
+Mcu.Pin6=PA10
+Mcu.Pin7=PA11
+Mcu.Pin8=PA12
+Mcu.Pin9=PA13
+Mcu.PinsNb=16
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F411CEUx
@@ -61,6 +63,11 @@ PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
+PB10.GPIOParameters=PinState,GPIO_PuPd
+PB10.GPIO_PuPd=GPIO_PULLDOWN
+PB10.Locked=true
+PB10.PinState=GPIO_PIN_RESET
+PB10.Signal=GPIO_Output
 PB13.Locked=true
 PB13.Mode=TX_Only_Simplex_Unidirect_Master
 PB13.Signal=SPI2_SCK
@@ -71,6 +78,10 @@ PB6.Mode=I2C
 PB6.Signal=I2C1_SCL
 PB7.Mode=I2C
 PB7.Signal=I2C1_SDA
+PC13-ANTI_TAMP.GPIOParameters=PinState
+PC13-ANTI_TAMP.Locked=true
+PC13-ANTI_TAMP.PinState=GPIO_PIN_SET
+PC13-ANTI_TAMP.Signal=GPIO_Output
 PH0\ -\ OSC_IN.Mode=HSE-External-Oscillator
 PH0\ -\ OSC_IN.Signal=RCC_OSC_IN
 PH1\ -\ OSC_OUT.Mode=HSE-External-Oscillator