update bootloader

bootloader/BSP/LCD/lcd.c

@@ -4,7 +4,7 @@
 #include "delay.h"
 #include "spi.h"
 
-#define OFFSET_Y 0
+#define OFFSET_Y 80
 
 /******************************************************************************
       函数说明：在指定区域填充颜色
@@ -60,7 +60,7 @@ void LCD_Fill(u16 xsta,u16 ysta,u16 xend,u16 yend,u16 color)
 ******************************************************************************/
 void LCD_DrawPoint(u16 x,u16 y,u16 color)
 {
-	LCD_Address_Set(x,y,x,y);//设置光标位置
+	LCD_Address_Set(x,y+OFFSET_Y,x,y+OFFSET_Y);//设置光标位置
 	LCD_WR_DATA(color);
 }
 
@@ -201,7 +201,7 @@ void LCD_ShowChinese12x12(u16 x,u16 y,u8 *s,u16 fc,u16 bc,u8 sizey,u8 mode)
 	{
 		if((tfont12[k].Index[0]==*(s))&&(tfont12[k].Index[1]==*(s+1)))
 		{
-			LCD_Address_Set(x,y,x+sizey-1,y+sizey-1);
+			LCD_Address_Set(x,y+OFFSET_Y,x+sizey-1,y+sizey-1+OFFSET_Y);
 			for(i=0;i<TypefaceNum;i++)
 			{
 				for(j=0;j<8;j++)
@@ -258,7 +258,7 @@ void LCD_ShowChinese16x16(u16 x,u16 y,u8 *s,u16 fc,u16 bc,u8 sizey,u8 mode)
 	{
 		if ((tfont16[k].Index[0]==*(s))&&(tfont16[k].Index[1]==*(s+1)))
 		{
-			LCD_Address_Set(x,y,x+sizey-1,y+sizey-1);
+			LCD_Address_Set(x,y+OFFSET_Y,x+sizey-1,y+sizey-1+OFFSET_Y);
 			for(i=0;i<TypefaceNum;i++)
 			{
 				for(j=0;j<8;j++)
@@ -316,7 +316,7 @@ void LCD_ShowChinese24x24(u16 x,u16 y,u8 *s,u16 fc,u16 bc,u8 sizey,u8 mode)
 	{
 		if ((tfont24[k].Index[0]==*(s))&&(tfont24[k].Index[1]==*(s+1)))
 		{
-			LCD_Address_Set(x,y,x+sizey-1,y+sizey-1);
+			LCD_Address_Set(x,y+OFFSET_Y,x+sizey-1,y+sizey-1+OFFSET_Y);
 			for(i=0;i<TypefaceNum;i++)
 			{
 				for(j=0;j<8;j++)
@@ -373,7 +373,7 @@ void LCD_ShowChinese32x32(u16 x,u16 y,u8 *s,u16 fc,u16 bc,u8 sizey,u8 mode)
 	{
 		if ((tfont32[k].Index[0]==*(s))&&(tfont32[k].Index[1]==*(s+1)))
 		{
-			LCD_Address_Set(x,y,x+sizey-1,y+sizey-1);
+			LCD_Address_Set(x,y+OFFSET_Y,x+sizey-1,y+sizey-1+OFFSET_Y);
 			for(i=0;i<TypefaceNum;i++)
 			{
 				for(j=0;j<8;j++)
@@ -426,7 +426,7 @@ void LCD_ShowChar(u16 x,u16 y,u8 num,u16 fc,u16 bc,u8 sizey,u8 mode)
 	sizex=sizey/2;
 	TypefaceNum=(sizex/8+((sizex%8)?1:0))*sizey;
 	num=num-' ';    //得到偏移后的值
-	LCD_Address_Set(x,y,x+sizex-1,y+sizey-1);  //设置光标位置
+	LCD_Address_Set(x,y+OFFSET_Y,x+sizex-1,y+sizey-1+OFFSET_Y);  //设置光标位置
 	for(i=0;i<TypefaceNum;i++)
 	{
 		if(sizey==12)temp=ascii_1206[num][i];		       //调用6x12字体
@@ -571,7 +571,7 @@ void LCD_ShowPicture(u16 x,u16 y,u16 length,u16 width,const u8 pic[])
 {
 	u16 i,j;
 	u32 k=0;
-	LCD_Address_Set(x,y,x+length-1,y+width-1);
+	LCD_Address_Set(x,y+OFFSET_Y,x+length-1,y+width-1+OFFSET_Y);
 	for(i=0;i<length;i++)
 	{
 		for(j=0;j<width;j++)

bootloader/BSP/LCD/lcd_init.h

@@ -3,15 +3,15 @@
 
 #include "sys.h"
 
-#define USE_HORIZONTAL 0  //设置横屏或者竖屏显示 0或1为竖屏 2或3为横屏
+#define USE_HORIZONTAL 1  //设置横屏或者竖屏显示 0或1为竖屏 2或3为横屏
 
 
 #if USE_HORIZONTAL==0||USE_HORIZONTAL==1
 #define LCD_W 240
-#define LCD_H 280
+#define LCD_H 240
 
 #else
-#define LCD_W 280
+#define LCD_W 240
 #define LCD_H 240
 #endif
 

bootloader/Core/Src/main.c

@@ -109,7 +109,7 @@ int main(void)
   //key_boot
 	Key_Port_Init();
 
-	//PWM Start
+	// PWM Start for LCD backlight
 	HAL_TIM_PWM_Start(&htim1, TIM_CHANNEL_3);
 
 	//lcd
@@ -125,7 +125,7 @@ int main(void)
     delay_ms(500);
     if(HAL_GPIO_ReadPin(KEYB_PORT, KEYB_PIN) == 0)
     {
-      LCD_ShowString(72, LCD_H/2, (uint8_t*)"Bootload", WHITE, BLACK, 24, 0);//12*6,16*8,24*12,32*16
+      LCD_ShowString(72, LCD_H/3, (uint8_t*)"Bootload", WHITE, BLACK, 24, 0);//12*6,16*8,24*12,32*16
       //menu
       FLASH_If_Init();
       Main_Menu();
@@ -179,8 +179,8 @@ int main(void)
 		// no legal APP
 		else
 		{
-			LCD_ShowString(74, LCD_H/2, (uint8_t*)"No App!", WHITE, BLACK, 24, 0);//12*6,16*8,24*12,32*16
+			LCD_ShowString(74, LCD_H/3, (uint8_t*)"No App!", WHITE, BLACK, 24, 0);//12*6,16*8,24*12,32*16
-      LCD_ShowString(32, LCD_H/2+48, (uint8_t*)"Please Download", WHITE, BLACK, 24, 0);
+      LCD_ShowString(32, LCD_H/3+48, (uint8_t*)"Please Download", WHITE, BLACK, 24, 0);
 			HAL_Delay(1000);
 		}
   }

bootloader/Core/Src/usart.c

@@ -39,7 +39,7 @@ void MX_USART6_UART_Init(void)
 
   /* USER CODE END USART6_Init 1 */
   huart6.Instance = USART6;
-  huart6.Init.BaudRate = 115200;
+  huart6.Init.BaudRate = 1500000;
   huart6.Init.WordLength = UART_WORDLENGTH_8B;
   huart6.Init.StopBits = UART_STOPBITS_1;
   huart6.Init.Parity = UART_PARITY_NONE;

bootloader/Ymodem/common.c

@@ -227,7 +227,7 @@ uint8_t GetKey(void)
   */
 void SerialPutChar(uint8_t c)
 {
-  USART_SendData(USART1, c);
+  USART_SendData(USART6, c);
   while (__HAL_UART_GET_FLAG(&huart6, UART_FLAG_TXE) == RESET)
   {
   }

bootloader/Ymodem/flash_if.h

@@ -37,7 +37,7 @@
 #define ADDR_FLASH_SECTOR_5     ((uint32_t)0x08020000) /* Base @ of Sector 5, 128 Kbyte */
 #define ADDR_FLASH_SECTOR_6     ((uint32_t)0x08040000) /* Base @ of Sector 6, 128 Kbyte */
 #define ADDR_FLASH_SECTOR_7     ((uint32_t)0x08060000) /* Base @ of Sector 7, 128 Kbyte */
-#define ADDR_FLASH_SECTOR_8     ((uint32_t)0x08080000) /* Base @ of Sector 8, 128 Kbyte */
+// #define ADDR_FLASH_SECTOR_8     ((uint32_t)0x08080000) /* Base @ of Sector 8, 128 Kbyte */
 // #define ADDR_FLASH_SECTOR_9     ((uint32_t)0x080A0000) /* Base @ of Sector 9, 128 Kbyte */
 // #define ADDR_FLASH_SECTOR_10    ((uint32_t)0x080C0000) /* Base @ of Sector 10, 128 Kbyte */
 // #define ADDR_FLASH_SECTOR_11    ((uint32_t)0x080E0000) /* Base @ of Sector 11, 128 Kbyte */