add pd ufp

Power_Pico/BSP/PD/fusb302_dev.h

@@ -0,0 +1,84 @@
+#ifndef __FUSB302_DEV_H__
+#define __FUSB302_DEV_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include "FUSB302_UFP.h"
+#include "PD_UFP_Protocol.h"
+
+typedef uint8_t status_power_t;
+
+enum {
+    PD_UFP_VOLTAGE_LED_OFF      = 0,
+    PD_UFP_VOLTAGE_LED_5V       = 1,
+    PD_UFP_VOLTAGE_LED_9V       = 2,
+    PD_UFP_VOLTAGE_LED_12V      = 3,
+    PD_UFP_VOLTAGE_LED_15V      = 4,
+    PD_UFP_VOLTAGE_LED_20V      = 5,
+    PD_UFP_VOLTAGE_LED_AUTO     = 6
+};
+typedef uint8_t PD_UFP_VOLTAGE_LED_t;
+
+enum {
+    PD_UFP_CURRENT_LED_OFF      = 0,
+    PD_UFP_CURRENT_LED_LE_1V    = 1,
+    PD_UFP_CURRENT_LED_LE_3V    = 2,
+    PD_UFP_CURRENT_LED_GT_3V    = 3,
+    PD_UFP_CURRENT_LED_AUTO     = 4
+};
+typedef uint8_t PD_UFP_CURRENT_LED_t;
+
+enum {
+    STATUS_POWER_NA = 0,
+    STATUS_POWER_TYP,
+    STATUS_POWER_PPS
+};
+typedef uint8_t status_power_t;
+
+typedef struct
+{
+    uint8_t state;
+    //uint8_t pd_ic_initial;
+    PD_protocol_t protocol;
+
+    // Power ready power
+    uint16_t ready_voltage;
+    uint16_t ready_current;
+
+    // PPS setup
+    uint16_t PPS_voltage_next;
+    uint8_t PPS_current_next;
+    // Status
+    uint8_t status_initialized;
+    uint8_t status_src_cap_received;
+    status_power_t status_power;
+    // Timer and counter for PD Policy
+    uint32_t time_polling;
+    uint32_t time_wait_src_cap;
+    uint32_t time_wait_ps_rdy;
+    uint32_t time_PPS_request;
+    uint8_t get_src_cap_retry_count;
+    uint8_t wait_src_cap;
+    uint8_t wait_ps_rdy;
+    uint8_t send_request;
+    uint8_t cc;
+    char power_list[7][24];
+    uint8_t power_list_num;
+    uint8_t power_index;
+    float power_v;
+    float power_i;
+}App_PD_t;
+
+extern FUSB302_dev_t fusb302_dev;
+extern PD_protocol_t pd_protocol;
+
+uint8_t fusb302_dev_init(void);
+uint8_t fusb302_test(void);
+
+#ifdef __cplusplus
+}
+#endif
+#endif