diff --git a/Power_Pico/User/Tasks/Src/user_HardwareInitTask.c b/Power_Pico/User/Tasks/Src/user_HardwareInitTask.c
index 4959d22..6d63229 100644
--- a/Power_Pico/User/Tasks/Src/user_HardwareInitTask.c
+++ b/Power_Pico/User/Tasks/Src/user_HardwareInitTask.c
@@ -49,18 +49,23 @@ void HardwareInitTask(void *argument)
     // HAL_UART_Transmit_DMA(&huart6,(uint8_t *)"power-pico\r\n",13);
 
     // ADC
-    HAL_ADC_Start_DMA(&hadc1, (uint32_t*)adc_packet.data, ADC_TIMES * ADC_CHANELS); /*启动ADC的DMA传输，配合定时器触发ADC转换  12位的ADC对应0-4095 */
+    HAL_ADC_Start_DMA(&hadc1, (uint32_t *)adc_packet.data, ADC_TIMES * ADC_CHANELS); /*启动ADC的DMA传输，配合定时器触发ADC转换  12位的ADC对应0-4095 */
     HAL_TIM_Base_Start(&htim2); /*开启定时器，用溢出时间来触发ADC*/
 
     adc_packet.header[0] = 0x55;
     adc_packet.header[1] = 0xAA;
     adc_packet.header[2] = ADC_TIMES;
     adc_packet.header[3] = ADC_CHANELS;
+    // 填充模式位
+    adc_packet.header[4] = 0x10;
 
     // gate, for current flow route selection, high current by default
     Gate_Port_Init();
     flow_route_selection(HIGH_CUR);
 
+    // FUSB CC dis connect
+    HAL_GPIO_WritePin(GPIOB, GPIO_PIN_10, GPIO_PIN_RESET);
+
     // PWM Start for LCD backlight
     HAL_TIM_PWM_Start(&htim1,TIM_CHANNEL_3);